Old Barn Doors – Check This Out..

Indoor Sliding Barn Doors

Barn doors might be better left on barns. I currently receive about a call a month to ask if I can sort out a accommodation sliding barn door injury. This is a trend that has continued since hotel designers decided that it would be a great concept to set up sliding type barn doors to separate bathrooms as well as other areas from the hotel guest bedroom.

The very first time I saw a door of this type installed in a newly renovated hotel, I immediately believed that this is any sort of accident waiting to happen. It was either going to produce a pinch injury, a crush incident, or perhaps the door would likely fall off of the hanging rail and smash into someone. I had been more concerned that unattended children having fun with these doors would get seriously injured.

Sure enough, inside a month of seeing this type of door installation, the calls started getting into work. These calls have been ongoing for the last 4 years.

The peculiar part of these installations is that we now have a lot of small hardware component pieces that may become loose and ultimately fall off causing detachment in the door. Various manufacturers use different types and qualities of materials to help make the doors slide, however, most door systems are subject to the same problems. They loosen, fall apart, fall away from their track or move from adjustment leading to serious personal injuries of hotel guests as the sliding doors disconnect from their hanging hardware in one method or another.

What Fails? Defectively operating accommodation barn doors have formulated injuries in many different ways. Hanger bars have become detached from your wall. Guide rollers and limiters are becoming disconnected. Screws go missing and were unchecked. Door hangers have lost their grip. Rollers have cracked and broken. Rubber stops have disappeared. The base plates and screws that maintain the door from swinging from the wall have broken or disconnected completely from your floor. Rust has affected the hardware as a result of moisture through the bathroom, and parts have seized. Glass doors have shattered as a result of stresses imparted since the door has been pushed into obstructions while they are from alignment.

When depositions of hotel staff are taken plus they are asked regarding how the barn door systems are maintained, the normal fact is “we don’t do much”. Sometimes they promise that they have boxes of replacement parts left from the original installation, and “whenever we notice something wrong, we go get one of those spares”. Many hotels claim they make routine inspections with their guest rooms, but I haven’t encountered one hotel that pays the needed awareness of these doors, despite a physical injury incident occurs.

In most hotels the housekeepers are responsible for cleaning and preparing the rooms for new guests. Those housekeepers are definitely the only search for room condition before a new occupancy. Housekeeping concerns are generally confined to quickly checking to find out if the carpet is soiled, trash can liners will be in place, the bed sheets are clean, and toiletries will be in spot in the toilet. Housekeepers do not have the skill set, time inside the room or training to examine loose hardware on sliding barn doors. Some managers have claimed which they inspect the rooms with some other hotel personnel over a routine scheduled cycle, however their inspections are often very far apart. Quarterly as well as monthly room checks are inadequate to counteract the daily changes that occur with all the hardware on many barn style doors. I actually have never seen any information regarding specific barn door hardware inspections. Generally, life safety and room security are the extent of the door inspections, if those issues are even evaluated.

What Type Of Parts Are Saved To A Sliding Barn Door? Installations and hardware of such barn door systems often include as much as 30 separate components. You can find bracket hangers that are affixed to the top of the some kind of a slab door. Doors can weigh over 200 pounds depending upon the doorway width, thickness, and height. The doorway hangers are affixed to a roller of some sort. These rollers can be produced from steel, rubber, plastic or aluminum. Glass doors are hung using slots or holes that were precut inside the glass prior to tempering. Glass doors have hardware that really must be gasketed with rubber or plastic to maintain metal components from making contact with the glass directly. All doors using rollers are located in place with the axel or screws. Next, the rod or bar stock that these particular rollers proceed has to be properly connected to the wall.

To make sure that the carrier rods or bars are safely mounted, there should be steel backing plates or wooden blocking inside the appropriate location in the adjacent wall. Sometimes, a renovation of the room has not included these backing materials, as well as the hanging rods are founded into drywall alone. The brackets that mount these rods or brackets must be positively located into some formidable blocking materials, and appropriately mounted using proper screws created to keep up with the weight from the door and sliding systems. Deformation in the finished drywall surface, as a result of weight of improperly designed systems, has established looseness of the hanging tracks, and ultimately resulted in barn door failures.

Many barn door carriers have only a top roller and rely upon a bar or piece of metal to keep the door from lifting from the hanging track. More sophisticated systems might have both a top and bottom roller to limit the movement in the door once the door is inadvertently pushed up by usage. Most wooden or metal barn door hardware sets demand a slot cut into the base of the entrance to ensure that a flat plate, screw or t shaped piece of metal are able to keep the door from swinging diagonally from the opening when used. Glass barn doors usually have L shaped floor guides to direct the travel in the sliding door. Not all the barn door system has this bottom piece of hardware and some are incredibly weak.

As well as these basic components, in addition there are additional stop pieces, limiters, snubbers as well as other regulating pieces that retain the door on the hanging rod or bar stock, based upon the program, manufacturer, and design of the doorway hardware. Some barn doors are simply glass sheets. These doors are generally tempered or manufactured from laminated safety glass. Moving doors manufactured from glass can spontaneously shatter because of stresses imparted to the glass as early as when manufactured. Glass doors used for these otrwje door installations are like all other glass doors. They can be afflicted with previous use, impact from vacuums or any other normal operational conditions. Sometimes holes or slots prepared within the glass that are used to hang the doors become stressed and the door shatters unexpectedly. Utilizing a sliding glass door comes along with increased chance of failure as it is a moving part of glass. Glass is normally not as resilient to stresses being a solid wood or even a metal door and enhances the potential for injury.

Leave a comment

Your email address will not be published. Required fields are marked *